| General system data |
| Safety category in accordance with EN 954-1 |
4 |
| Safety type in accordance with IEC/EN 61508 |
3 |
| Safety type in accordance with IEC/EN 61496-1 |
4 |
| STOP category in accordance with IEC/EN 60204-1 |
0 and 1 |
| Supply voltage |
24 V DC, +-15 % |
| System response time (without sensor/actuator response time) |
max. 80 ms |
| Readiness delay |
max. 10 s |
| Protection rating |
IP 20 (only suitable for use in electrical operating rooms/control cabinets with IP 54 minimum protection rating) |
| Ambient temperature, operation |
-20...+60 °C |
| Ambient temperature, storage |
-30...+70 °C |
| Dimensions (W x H x D) |
45 mm x 105 mm x 120 mm |
| Housing material |
Polyamide PA 66 |
| Installation |
Snap-on fastening on DIN rails in accordance with EN 50022 |
| Connection system |
1x 0.5 to 4.0 mm² and 2x 0.5 to 2.5 mm² (single-wired)
1x 0.5 to 2.5 mm² and 2x 0.5 to 1.5 mm² (multi-wire)
2x 20 to 14 (AWG) |
| Current consumption |
150 mA (ASM1/1, ASM1E/1), 200 mA (ASM1/2, ASM1E/2) |
| Number of Safety Monitors per AS-Interface network |
4 (with maximum 31 AS-Interface slaves) |
| AS-i data |
| AS-i profile |
Monitor 7.F |
| AS-i voltage range |
18,5...31,6 V |
| AS-i current consumption |
< 45 mA |
| Configuration interface |
| RS 232 |
9600 baud, no parity, 1 start bit, 1 stop bit, 8 data bits |
| Inputs and outputs |
| Input start |
Opto-coupling input (high-active), input current approx. 10 mA with 24 V DC |
| Input feedback circuit |
Opto-coupling input (high-active), input current approx. 10 mA with 24 V DC |
| Signal output ("Safety on" – OSSDs active) |
pnp-transistor output, 200 mA, short circuit and reverse-connect protection |
| Safety-related switching outputs |
ASM2E/1 |
ASM2E/2 |
| Safety-related switching outputs (OSSDs) |
1 |
1 |
| Safety-related switching outputs (OSSDs), synchronous with AS-i switching signal |
|
1 |
| Safe AS-i switching signal for safe actuators or coupling adjacent networks |
1 |
1 |
| Safety-related switching outputs (OSSD), potential-free |
1 A, 24 V DC / 3 A, 230 V AC |
| Fuse |
External with max. 4 A MT |
| Overvoltage category |
3 (for rated operating voltage, 300 V AC in accordance with VDE 0110 Part 1) |
