| General system data of the PROFIsafe Receiver |
| Safety category |
4 in acc. with EN IEC 61496-1
SIL 3 in acc. with IEC 61508 |
| Supply voltage |
24 V DC, +-20 %, external power supply with secure
mains supply isolation |
| Residual ripple of supply voltage |
± 5 % within the limits of Uv |
| Power consumption |
150 mA (Uv = 28,8V; +20%)
160 mA (Uv = 24V)
170 mA (Uv= 19,2V; -20%) |
| Protection type |
IP65 |
| Ambient temperature, operation |
0 ... +50 °C |
| Ambient temperature, storage |
-20 ... +60 °C |
| Relative humidity |
15 ... 95 %, without condensation |
| PROFIBUS data rate |
9,6 kBd .. 12 MBd |
| PROFIBUS connection |
M12 plug, b-coded |
Additional response time of the
PROFIsafe part of the receiver |
20 ms |
| Cable tail lengths |
PROFIBUS output: 0,2 m
PROFIBUS input: 0,4 m
Power supply: 0,6 m |
| Power supply cable lengths |
< 100 m |
PROFIsafe services |
| Version of the PROFIsafe driver |
V1 |
| Cyclic data |
4 user data bytes of input data
4 user data bytes of output data |
| Acyclic data |
For reading out the switching state of the individual beams |
| Saving the parameters in the F-CPU |
Via Proxy-FB module for:
|
Number of parameter sets; can be
switched over via safe program
in the F-CPU |
Max. 255 depending on the available storage space on the F-CPU |
| Safety output restart delay |
The greater of the two values from:
- Watchdog time in the F-CPU + 20 ms
- Restart delay of the receiver
|
