The ERS200 E‑Stop Rope Switch series is used with preference with expansive points of operation. Its simple operation ensures fast stop command output along the point of operation.
The switch's alignment indicator ensures that it is easy to set. The ERS 200 variants enable integration in control circuits up to category 4 in accordance with EN ISO 13849.
Special features
Contact sets for integration up to category 4 in accordance with EN ISO 13849
Pulling the rope or rope fracture safely stops the machine
Simple setup through switching point indicator
Easy integration with 3 cable approach directions
Clicks in on both sides with friction-locking contacts
Compact metal housing
Protection rating: IP 67
Important technical data, overview
Switch type
E‑Stop command device in accordance with EN 60947‑5-5 and EN ISO 13850
Housing material
Metal
Contact allocation
1 NC + 1 NO
2 NC + 1 NO
2 NC
Switching principle
Creep contact
Internal actuator
Self-locking Safety Switch with 2 switching directions
Actuation force (extraction)
83 N, 235 N
Actuation force (slacken)
63 N, 147 N
Actuation force (pull-out with forced separation)
90 N, 250 N
Connection system
M20x1.5 (3-way)
Protection rating
IP 67
Functions
E‑Stop command device in accordance with EN 60947‑5-5 and EN ISO 13850
Integration in control circuits up to category 4 in accordance with EN ISO 13849
+ 1 NO
