| General system data |
| Type in accordance with IEC/EN 61496 |
4 |
| SIL in accordance with IEC 61508 and IEC/EN 62061 |
3 |
| Performance Level (PL) in accordance with EN ISO 13849-1 |
e |
| Probability of dangerous failure per hour (PFHD) |
For protective heights up to 900 mm, all resolutions |
1.90 x 10-8 1/h |
| For protective heights up to 1800 mm, all resolutions |
2.26 x 10-8 1/h |
| For protective heights up to 3000 mm |
2.67 x 10-8 1/h |
| Service life (TM) in accordance with EN ISO 13849-1 |
20 years |
| Number of cycles until dangerous failure (B10d) in accordance with EN 61810-2 (applies for all R-variants) |
With DC1 (ohmic load) |
On request |
| With AC1 (ohmic load) |
On request |
| With DC13 (inductive load) |
630,000 (5 A, 24 V) |
| With AC15 (inductive load) |
1,480,000 (3 A, 230 V) |
| Low load (20% nominal load) |
On request |
| Resolution |
14 mm |
30 mm |
| Range |
0...6 m |
0...18 m |
| Response time |
Transistor output |
5...41 ms |
5...22 ms |
| Relay output |
20...56 ms |
20...37 ms |
| AS-i Safety Interface |
10...46 ms |
10...27 ms |
| PROFIsafe interface |
25...61 ms |
25...62 ms |
| Protective field height |
150...1800 mm |
150...1800 mm |
| Supply voltage |
24 V DC, ±20 % |
| Connection cable length |
max. 100 m at 1.0 mm 2 |
| Safety class |
III and I (depending on model) |
| Protection rating |
IP 65* |
| Temperature range, operation |
0...+50° C |
| Temperature range, storage |
-25...+70° C |
| Relative humidity |
15...95 % |
| Profile cross-section |
52 mm x 55 mm |
| Weight per device (length-dependent) |
0.70...5.10 kg |
| Transmitter |
| Transmitter diodes, class in accordance with EN 60825 |
1 |
| Wavelength |
880 nm |
| Current consumption |
75 mA |
| Connection system |
Cable gland (M20) Hirschmann plug (DIN 43651), 12-pin MIN-style plug (MIN series), 3-pin M12 plug, 5-pin |
| Receiver |
| Current consumption |
160 mA without external load |
| Safety-related switching outputs (OSSDs) |
2 PNP transistor outputs (short-circuit proof, cross circuit monitored) 2 relay outputs (normal open contacts) AS-i Safety interface PROFIsafe interface |
| Switching voltage high active |
Min. Uv -1.0 V |
| Switching voltage low |
max. +2.5 V |
| Switching current |
Typical, 500 mA |
| Connection system |
Cable gland (T1: M20, R1: M25) Hirschmann plug (DIN 43651), T2: 12-pin, R2: 12-pin MIN-style plug (MIN series), T3: 7-pin, R3: 12-pin M12 plug (safety bus systems), 5-pin, R4: 8-pin |
