SRK 96

Technical Data

Safety Light Barrier
SRK 96
Safety category Type 2 according to EN/IEC 61496-1, -2 in combination with a test monitoring unit.
Operating range 1) 6 m
Limit range 2) 7 m
Reflektor PTKS 50x50
Light source red light laser diode
Wave lenght 670 nm
LaserProtection class 2 according to DIN/EN 60825-1
Switching frequency sensor 100 Hz
Response time 6 ms
Stand-by delay 200 ms
Operation voltage UB 10...30 VDC (residual ripple included)
Residual ripple 15% von UB
No-load current 40 mA
Switching output pnp transistor output
Function bright switching
Signal voltage high/low (UB - 2 V) / 2 V
Output current max. 100 mA
Housing Zinc die casting, yellow
Optical parts Glass
Weight 380 g
Connection Terminals or M12 circular plug-in connection
Ambient temperature (operation/storage) -10 °C bis +50 °C / -30 °C bis +60 °C
Protection switches 3) 1, 2, 3, 4
VDE-Protection class 4) II, protection isolated
Enclosure rating IP 67
Shock proof Semi sine, 30 gn, 11 ms (VDE 0660 T 208)
Vibration proof 10 - 55 Hz, max. 7,5 gn (VDE 0660 T 208)
Electronic compatibility according to EN 61496-1
Transmitter activ/not aktiv 8V / 2 V
Input resistance 10 k ±10%
Test time 12 ms + Response time test monitoring unit
Connectable modular safety interfaces TNT 35
TMC 66
MSI-s/R
MSI-sx/Rx
MSI-m/R
MSI-mx/Rx
1) Operating range: recommended Range with functional reserve
2) Limit range: max. possible range without function range
3) 1=transient protection, 2 pole reversal protection, 3=short circuit protection for all outputs, 4=Störaustastung
4) voltage 250 VAC

Note:

The through-beam safety light barrier is an electro-sensitive protective device only in connection with a safety-relevant control system where the cyclical testing of transmitter and receiver is carried out according to EN-/IEC61496-1, -2, category 2 (testing).