Ultrasonic fork sensor

Part no.: 50142867

SEK 9,228.60*

Available immediately

102 currently available

Icon Icon Icon
Series 14
Principle of physics optical and ultrasonics
Application Detection of non-transparent labels, Detection of transparent labels
Label width, min. 4 mm ultrasonics / 2 mm optical
Label gap, min. 2 mm
Medium Transparent and not transparent
Special version Teach input, ALC function (tracking), easyTeach function, Manual fine tuning of the switching threshold, Warning output
Light source LED, Infrared, LED
Wavelength 850 nm
Transmitted-signal shape Pulsed
LED group Exempt group (in acc. with EN 62471)
Protective circuit Short circuit protected, Polarity reversal protection
Supply voltage UB 18 ... 30 V, DC
Residual ripple 0 ... 10 %, From UB
Open-circuit current 0 ... 80 mA, Typical value
Number of teach inputs 1 Piece(s)
Type Teach input
Voltage type DC
Switching voltage high: ≥9V, low: ≤ 2 V
Input resistance 15,000 Ω
Active switching state High
Number of digital switching outputs 2 Piece(s)
Type Digital switching output
Voltage type DC
Switching current, max. 100 mA
Switching voltage low: ≤ 2 V, high: ≥(UB-2V)
Load capacity 0.01 µF
Switching element Transistor, Push-pull
Switching principle IO-Link / NPN light switching (switching in the gap), PNP dark switching (switching on the label)
Switching element Transistor, Push-pull
Switching principle active low (normal operation high, event case low)
Switching frequency 2,000 Hz, ultrasonics / 9061 Hz optical
Response time 0.2 ms, ultrasonics / 0.05 ms optical
Readiness delay 300 ms
Conveyor speed during teach-in 50 m/min
Type IO-Link
COM mode COM3
Profile Smart sensor profile
Min. cycle time COM3 = 0.5 ms
Frame type 2.5
Specification V1.1
Device ID 2501
SIO-mode support Yes
Number of connections 1 Piece(s)
Function Voltage supply, Signal IN, Signal OUT
Type of connection Connector
Thread size M12
Type Male
Material Metal
No. of pins 5 -pin
Encoding A-coded
Plug outlet Horizontal (parallel to belt movement)
Design Fork
Mouth width 4 mm
Mouth depth 80 mm
Dimension (W x H x L) 22 mm x 46.9 mm x 96 mm
Housing material Metal
Metal housing Diecast zinc, galvanic nickel coating
Net weight 270 g
Housing color Silver
Type of fastening Mounting thread, Through-hole mounting
Type of display LED
Operational controls Control buttons
Function of the operational control Dynamic teach on label carrier and label
Ambient temperature, operation 0 ... 60 °C
Degree of protection IP 65
Protection class III
Certifications c UL US
Standards applied EN 60947-5-2:2007+A1:2012
US patents US 6,314,054 B
Customs tariff number 85365019
ECLASS 5.1.4 27272801
ECLASS 8.0 27272801
ECLASS 9.0 27272801
ECLASS 10.0 27272801
ECLASS 11.0 27272801
ECLASS 12.0 27272801
ETIM 5.0 EC001847
ETIM 6.0 EC001847
ETIM 7.0 EC001848


Results list: 14 products found
K-D M12A-5P-2m-FAB
Connection cable
Part no.: 50104574
  • Connection: Connector, M12
  • Version: Axial, Female
  • No. of pins: 5 Piece(s)
  • Cable length: 2,000 mm
Part no.: 50104574

SEK 178.20*

Available immediately

49 currently available

K-D M12A-5P-5m-FAB
Connection cable
Part no.: 50104576
  • Connection: Connector, M12
  • Version: Axial, Female
  • No. of pins: 5 Piece(s)
  • Cable length: 5,000 mm
Part no.: 50104576

SEK 232.20*

Available immediately

26 currently available