Attention! Article in the discontinuation phase.

ASM1E/2

AS-i safety monitor

Part no.: 580025

SEK 8,931.60*

Delivery to be confirmed

Compare

Series

ASM1

Functions	Service button for manual error unlocking and automatic device swap-out of the safe AS-i slaves, Activation/deactivation of function modules, Diagnostics data transfer via AS-Interface, Dynamic contactor monitoring (EDM), selectable, Error unlocking via AS-Interface, Monitoring modules with contact bounce filter, Monitoring modules with contact-simultaneity monitoring, Programmable logic operators, FLIP-FLOP, Programmable logic operators, switch on/off delay, Programmable logic operators, system statuses, Start/restart interlock (RES), selectable, Status LED display for AS-Interface communication, OSSD, start/restart interlock, protective mode, errors, STOP 0 / STOP 1, Support of AS-Interface A/B technology, System signal output
Number of configurable function modules	48 Piece(s)
Number of programmable logic operators, OR (inputs)	6 Piece(s)
Number of programmable logic operators, AND (inputs)	6 Piece(s)
Muting function	No

SIL	3, IEC 61508
SILCL	3, IEC/EN 62061
Performance Level (PL)	e, EN ISO 13849-1
PFH_D	9.1E-09 per hour
Mission time	20 years, EN ISO 13849-1
Category	4, EN ISO 13849
STOP category	0 and 1, IEC/EN 60204-1
B10_d at DC13 (inductive load)	10,000,000 number of cycles, (I < 2 A, 24 V)
B10_d at AC15 (inductive load)	100,000 number of cycles, (2 A, 230 V), 250,000 (1 A, 230 V), 540,000 (0.5 A, 230 V)

Number of safety monitors per AS-Interface network	4 Piece(s)
Number of safety monitors, additional text	With maximum 31 integrated AS-Interface slaves
Protective circuit	Short circuit protected, Polarity reversal protection

Supply voltage U_B	24 V, DC, -15 ... 15 %
Current consumption, max.	200 mA, Without external load
Current consumption from AS-i circuit	45 mA
Overvoltage category	III, For rated operating voltage of 300 V AC in accordance with VDE 0110 part 1
Fuse	External with max. 4 A semi time-lag

Number of digital switching inputs

2 Piece(s)

Type	Digital switching input

Number of safety-related switching outputs (OSSDs)	2 Piece(s)
Number of digital switching outputs	1 Piece(s)

Type	Digital switching output
Switching voltage, typ.	22 V
Voltage type	DC

System reaction time	40 ms
Readiness delay	10 ms

Type	AS-Interface Safety at Work, RS 232

Function	Process
AS-i profile	Monitor 7.F
Slave address	1..31 programmable, default=0
Cycle time acc. to AS-i specifications	Max. 5 ms ms

Number of connections

2 Piece(s)

Function	AS-i interface, Signal IN, Signal OUT, Voltage supply
Type of connection	Terminal
Type of terminal	Screw terminal
No. of pins	19 -pin

Function	Configuration interface
Type of connection	RJ45
Designation on device	CONFIG

Connection cross sections

1 x 0.2 to 2.5 mm², wire, 1 x 0.25 to 1 mm², wire with wire-end sleeve, 1 x 0.25 to 2.5 mm², wire with wire-end sleeve, 2 x 0.2 to 1.0 mm², wire, 2 x 0.2 to 1.5 mm², wire, 2 x 0.5 to 1.5 mm², wire with twin wire-end sleeve

Dimension (W x H x L)	45 mm x 105 mm x 120 mm
Housing material	Plastic
Plastic housing	PA 66
Net weight	450 g
Housing color	Black
Type of fastening	Snap-on mounting

Type of display	LED
Type of configuration	Software, Teach-in
Operational controls	PC software, Control buttons

Ambient temperature, operation	-20 ... 60 °C
Ambient temperature, storage	-30 ... 70 °C

Degree of protection	IP 20, Only suitable for use in electrical operating rooms/cabinets with IP 54 minimum degree of protection.
Protection class	III
Certifications	AS-i, c TÜV Rheinland US, c UL US, TÜV Rheinland
US patents	US 6,285,096 B

Customs tariff number	85371098
ECLASS 8.0	27242604
ECLASS 9.0	27242604
ECLASS 10.0	27242604
ECLASS 12.0	27242604
ETIM 5.0	EC001449
ETIM 6.0	EC001449
ETIM 7.0	EC001449