IS 203MP/4NO-1E0

Inductive switch

Part no.: 50137787

£85.32*

Delivery to be confirmed

Icon Icon Icon
Series 203
Typ. operating range limit Sn 1 mm
Operating range Sa 0 ... 0.8 mm
Protective circuit Short circuit protected, Inductive protection, Polarity reversal protection
Supply voltage UB 10 ... 30 V, DC
Residual ripple 0 ... 20 %, From UB
Open-circuit current 0 ... 10 mA
Temperature drift, max. (in % of Sr) 10 %, Over the entire operating temperature range
Repeatability, max. (in % of Sr) 5 %, For UB = 20 … 30 V DC, ambient temperature Ta = 23 °C ± 5 °C
Switching hysteresis 10 %
Number of digital switching outputs 1 Piece(s)
Voltage type DC
Switching current, max. 200 mA
Residual current, max. 0.1 mA
Voltage drop ≤ 2 V
Switching element Transistor, PNP
Switching principle NO (normally open)
Switching frequency 3,000 Hz
Readiness delay 10 ms
Number of connections 1 Piece(s)
Function Signal OUT, Voltage supply
Type of connection Cable
Cable length 2,000 mm
Sheathing material PUR
Cable color Gray
Number of conductors 3 -wire
Wire cross section 0.055 mm²
Design Cylindrical
Dimension (Ø x L) 3 mm x 22 mm
Type of installation Embedded
Housing material Stainless steel
Stainless steel housing V2A
Sensing face material Plastic, Polyester, matt
Net weight 4 g
Housing color Red, RAL 3000, Silver
Standard measuring plate 3 x 3 mm², Fe360
Type of display LED
Number of LEDs 1 Piece(s)
Ambient temperature, operation -25 ... 70 °C
Ambient temperature, storage -25 ... 70 °C
Degree of protection IP 67
Protection class III
Certifications UL
Test procedure for EMC in accordance with standard IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4
Standards applied IEC/EN 60947-5-2
Aluminum 0.5
Stainless steel 0.8
Copper 0.45
Brass 0.6
Fe360 steel 1
Customs tariff number 85365019
ECLASS 5.1.4 27270101
ECLASS 8.0 27270101
ECLASS 9.0 27270101
ECLASS 10.0 27270101
ECLASS 11.0 27270101
ECLASS 12.0 27274001
ETIM 5.0 EC002714
ETIM 6.0 EC002714
ETIM 7.0 EC002714
Results list: 1 products found
MC 003K
Clamp
Part no.: 50134199
  • Design of mounting device: Mounting clamp
  • Type of fastening, at device: Clampable
  • Type of fastening, at system: Through-hole mounting
  • Mounting device material: Plastic
Part no.: 50134199

£11.45*

Available immediately

37 currently available

3D-CAD model - zip
EPLAN macro - edz
Declaration of Conformity - pdf