RD800

The RD 800 safety transponders with RFID-coded actuator offer optimum tampering protection.
Extra installation measures to protect against tampering are therefore no longer necessary. Even with just one device, the RD 800 achieve performance level PL e in accordance with EN ISO 13849-1. The OSSD outputs make it easy to integrate the devices in the safety circuit.

The RD800 safety transponders with RFID-coded actuator offer optimum tampering protection. Extra installation measures to protect against tampering are therefore no longer necessary. Even with just one device, the RD800 achieve performance level PL e in accordance with EN ISO 13849-1. The OSSD outputs make it easy to integrate the devices in the safety circuit.

Advantages for you

Wear-free operation and long life expectancy: even with frequent operating cycles
Optimum protection against manipulation: The RFID‑coded actuators offer optimum protection against manipulation. Extra installation measures are therefore no longer necessary
Performance level e: Performance level e in accordance with EN ISO 13849-1 is already achieved with just one device
Wider operating area from various directions:
- for maximum flexibility when installing
- supports applications with large tolerances
- ensures reliable operation, even if mechanical properties change over time

Highlights

LEDs for fast status information and diagnosis

The integrated LEDs allow easy reading of the sensor status. It can thus be quickly recognized whether the device is active or the door is open, and at which point the safety chain has been interrupted. Internal device information is also clearly visible.

Application

Monitoring of doors and flaps, with high protection against manipulation

Requirement:
The closed state of safety guards such as doors or flaps must be monitored. EN ISO 14119 stipulates that measures to protect against manipulation must also be provided. If this is not possible through constructive measures, the sensor must have a high level of protection against manipulation.

Solution:
The RD800 contactless safety transponders with RFID coding offer maximum protection against manipulation. With their OSSD outputs, they are also easy to integrate in the safety circuit.

Technical properties

	RD800
	Type 4 interlock device / contactless actuation in accordance with EN ISO 14119
	High-strength plastic housing, degrees of protection IP 67 / IP 69K
	Actuator with low or high coding level in accordance with EN ISO 14119
	Performance level PL e, category 4 in acc. with EN ISO 13849-1 with a single device
	OSSD safety outputs, series connection possible
	Laser inscription, permanently legible even under harsh conditions
	LEDs for status display on sensor and signal output
	Models with programming input for teaching-in actuators
	Connection via cable or M12 connector