IS 230FM/2NO.5-10E

Inductive switch

Part no.: 50128166

Icon Icon
Series 230
Typ. operating range limit Sn 10 mm
Operating range Sa 0 ... 8.1 mm
Special version Reduction factor 1
Protective circuit Short circuit protected, Inductive protection, Polarity reversal protection
Supply voltage UB 10 ... 30 V, DC
Residual ripple 0 ... 20 %, From UB
Open-circuit current 0 ... 10 mA
Temperature drift, max. (in % of Sr) 10 %, Over the entire operating temperature range
Repeatability, max. (in % of Sr) 5 %, For UB = 20 … 30 V DC, ambient temperature Ta = 23 °C ± 5 °C
Switching hysteresis 15 %
Number of digital switching outputs 1 Piece(s)
Voltage type DC
Switching current, max. 200 mA
Residual current, max. 0.1 mA
Voltage drop ≤ 2 V
Switching element Transistor, NPN
Switching principle NO (normally open)
Switching frequency 50 Hz
Readiness delay 50 ms
Number of connections 1 Piece(s)
Function Voltage supply, Signal OUT
Type of connection Cable
Cable length 2,000 mm
Sheathing material PUR
Cable color Black
Number of conductors 3 -wire
Wire cross section 0.34 mm²
Design Cylindrical
Thread size M30 x 1.5 mm
Dimension (Ø x L) 30 mm x 50 mm
Type of installation Embedded
Housing material Stainless steel
Stainless steel housing V2A
Sensing face material Stainless steel, AISI 303
Net weight 190 g
Housing color Silver
Type of fastening Via optional mounting device, Mounting thread
Standard measuring plate 30 x 30 mm², Fe360
Type of display LED
Number of LEDs 1 Piece(s)
Ambient temperature, operation -25 ... 70 °C
Degree of protection IP 68, IP 69K
Certifications c UL US
Test procedure for EMC in accordance with standard IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4
Standards applied IEC 60947-5-2
Aluminum 1
Stainless steel 0.6
Copper 0.8
Brass 1.3
Fe360 steel 1
Customs tariff number 85365019
ECLASS 5.1.4 27270101
ECLASS 8.0 27270101
ECLASS 9.0 27270101
ECLASS 10.0 27270101
ECLASS 11.0 27270101
ECLASS 12.0 27274001
ETIM 5.0 EC002714
ETIM 6.0 EC002714
ETIM 7.0 EC002714
Results list: 1 products found
BT D30M.5
Mounting bracket
Part no.: 50113510
  • Design of mounting device: Angle, L-shape
  • Type of fastening, at device: Screw type
  • Type of fastening, at system: Through-hole mounting
  • Mounting device material: Stainless steel
Part no.: 50113510

Filter

Results list: 2 products found
MC 030K
Clamp
Part no.: 50111503
  • Design of mounting device: Mounting clamp
  • Type of fastening, at device: Clampable
  • Type of fastening, at system: Through-hole mounting
  • Mounting device material: Plastic
Part no.: 50111503
MC 030K-LS
Clamp
Part no.: 50111504
  • Design of mounting device: Mounting clamp
  • Type of fastening, at device: Clampable with limit stop
  • Type of fastening, at system: Through-hole mounting
  • Mounting device material: Plastic
Part no.: 50111504
3D-CAD model - zip
EPLAN macro - edz
Declaration of Conformity - pdf