Watch/inquiry list
| Series | MLD 500 |
| Device type | Transceiver |
| Special version | Integrated muting indicator, Integrated status indicator |
| Functions | Contactor monitoring (EDM), selectable, Alternative connection for second muting signal, Muting enable function, Muting-timeout extension, Sequence controlled 2-sensor muting, Start/restart interlock (RES), Timing controlled 2-sensor muting |
| Integrated laser alignment aid | No |
| Integrated muting indicator | Yes |
| Integrated status indicator | Yes |
| Type | 4, IEC/EN 61496 |
| SIL | 3, IEC 61508 |
| SILCL | 3, IEC/EN 62061 |
| Performance Level (PL) | e, EN ISO 13849-1 |
| MTTFd | 204 years, EN ISO 13849-1 |
| PFHD | 6.6E-09 per hour |
| Mission time | 20 years, EN ISO 13849-1 |
| Category | 4, EN ISO 13849 |
| Operating range | 0.5 ... 8 m |
| Number of beams | 2 Piece(s) |
| Beam spacing | 500 mm |
| Light source | LED, Infrared |
| Wavelength | 850 nm |
| Transmitted-signal shape | Pulsed |
| LED risk group | Exempt group (in acc. with EN 62471:2008) |
| Selection of operating mode | Connection 1, pin 2: +24 V for operating mode 1, 2, 4, Connection 1, pin 2: 0 V for operating mode 3, 5, 6, Connection 1, pin 7: 0 V for operating mode 1, 2, 4 |
| Protective circuit | Short circuit protected, Overvoltage protection |
| Supply voltage UB | 24 V, DC, -20 ... 20 % |
| Current consumption, max. | 150 mA, Without external load |
| Fuse | External with max. 3 A |
| Number of digital switching inputs | 4 Piece(s) |
| Type | Digital switching input |
| Switching voltage high, min. | 18.2 V |
| Switching voltage low, max. | 2.5 V |
| Switching voltage, typ. | 23 V |
| Voltage type | DC |
| Switching current, max. | 5 mA |
| Number of safety-related switching outputs (OSSDs) | 2 Piece(s) |
| Number of digital switching outputs | 1 Piece(s) |
| Type | Safety-related switching output OSSD |
| Switching voltage high, min. | 18.2 V |
| Switching voltage low, max. | 2.5 V |
| Switching voltage, typ. | 23 V |
| Voltage type | DC |
| Current load, max. | 380 mA |
| Load inductivity | 2,200,000 µH |
| Load capacity | 0.3 µF |
| Residual current, max. | 0.2 mA |
| Residual current, typ. | 0.002 mA |
| Voltage drop | 1 V |
| Switching element | Transistor, PNP |
| Switching element | Transistor, PNP |
| Type | Digital switching output |
| Switching voltage high, min. | 18.2 V |
| Switching voltage low, max. | 2.5 V |
| Switching voltage, typ. | 23 V |
| Voltage type | DC |
| Response time | 50 ms |
| Restart delay time | 100 ms |
| Number of connections | 2 Piece(s) |
| Function | Machine interface |
| Type of connection | Connector |
| Thread size | M12 |
| Material | Metal |
| No. of pins | 8 -pin |
| Function | Local interface |
| Type of connection | Connector |
| Thread size | M12 |
| Material | Metal |
| No. of pins | 5 -pin |
| Permissible conductor cross section, typ. | 0.25 mm² |
| Length of connection cable, max. | 100 m |
| Permissible cable resistance to load, max. | 200 Ω |
| Dimension (W x H x L) | 52 mm x 600 mm x 64.7 mm |
| Housing material | Metal |
| Metal housing | Aluminum |
| Lens cover material | Plastic / PMMA |
| Material of end caps | Diecast zinc |
| Net weight | 1,400 g |
| Housing color | Yellow, RAL 1021 |
| Type of fastening | Swivel mount, Groove mounting |
| Type of display | LED, Integrated muting indicator |
| Number of LEDs | 2 Piece(s) |
| Ambient temperature, operation | -30 ... 55 °C |
| Ambient temperature, storage | -40 ... 75 °C |
| Relative humidity (non-condensing) | 0 ... 95 % |
| Degree of protection | IP 67 |
| Protection class | III |
| Certifications | c CSA US, c TÜV NRTL US, TÜV Süd |
| US patents | US 6,418,546 B, US 7,741,595 B |
| Customs tariff number | 85365019 |
| ECLASS 8.0 | 27272703 |
| ECLASS 9.0 | 27272703 |
| ECLASS 10.0 | 27272703 |
| ECLASS 12.0 | 27272703 |
| ETIM 5.0 | EC001832 |
| ETIM 6.0 | EC001832 |
| ETIM 7.0 | EC001832 |
Results list: 7 products found
MLD530-RT2M-UDC-1000-S2
Safety sensor/transceiver set
Part no.:
426535
- Series: MLD-UDC
- Functions: Start/restart interlock (RES), selectable, Alterna...
- Integrated laser alignment aid: No
- Integrated muting indicator: Yes
MLD530-RT2M-UDC-1900-S2
Safety sensor/transceiver set
Part no.:
426519
- Series: MLD-UDC
- Functions: Sequence controlled 2-sensor muting, Alternative c...
- Integrated laser alignment aid: No
- Integrated muting indicator: Yes
MLD530-RT2M-UDC-900-S2
Safety sensor/transceiver set
Part no.:
426540
- Series: MLD-UDC
- Functions: Start/restart interlock (RES), selectable, Alterna...
- Integrated laser alignment aid: No
- Integrated muting indicator: Yes
MLDSET-M1-1300L
Safety sensor set
Part no.:
66900022
- Series: MLDSET
- Operating range, max.: 0 ... 8 m
- Number of beams: 2 Piece(s)
- Functions: Start/restart interlock (RES), selectable, Alterna...
MLDSET-M1-1300T
Safety sensor set
Part no.:
66900021
- Series: MLDSET
- Operating range, max.: 0 ... 8 m
- Number of beams: 2 Piece(s)
- Functions: Start/restart interlock (RES), selectable, Alterna...
MLDSET-M1-1600L
Safety sensor set
Part no.:
66900024
- Series: MLDSET
- Operating range, max.: 0 ... 8 m
- Number of beams: 2 Piece(s)
- Functions: Start/restart interlock (RES), selectable, Alterna...
MLDSET-M1-1600T
Safety sensor set
Part no.:
66900023
- Series: MLDSET
- Operating range, max.: 0 ... 8 m
- Number of beams: 2 Piece(s)
- Functions: Start/restart interlock (RES), selectable, Alterna...
Results list: 1 products found
MLD-M002
Deflecting mirror
Part no.:
66500100
- Number of beams: 2 Piece(s)
- Beam spacing: 500 mm
- Achievable range: 0.5 ... 8 m
Results list: 9 products found
MSI 410-01
Safety control
Part no.:
50132984
- Type: Safety control
- Number of inputs: 20 Piece(s)
- Number of outputs: 4 Piece(s)
- Type of terminal: Screw terminal
MSI 420-01
Safety control
Part no.:
50132986
- Type: Safety control
- Number of inputs: 16 Piece(s)
- Number of outputs: 8 Piece(s)
- Type of terminal: Screw terminal
MSI 430-01
Safety control
Part no.:
50132988
- Type: Safety control
- Number of inputs: 16 Piece(s)
- Number of outputs: 8 Piece(s)
- Type of terminal: Screw terminal
MSI-RM2B-01
Safety relay
Part no.:
547954
- Restart: Automatic
- Type of terminal: Screw terminal
- Functions: Signal conversion of electronic safety outputs on ...
- Contacts: 2 NO contacts / 1 NC contact
MSI-SR-LC21-01
Safety relay
Part no.:
50133008
- Application: Base device for E-Stop and safety door application...
- Restart: Automatic, Manual
- Type of terminal: Screw terminal
- Functions: Monitoring of solenoid switches, Monitoring of E-S...
MSI-SR-LC31AR-01
Safety relay
Part no.:
50133004
- Application: Base device for E-Stop and safety door application...
- Restart: Automatic
- Type of terminal: Screw terminal
- Functions: Monitoring of solenoid switches, Monitoring of E-S...
MSI-SR-LC31MR-01
Safety relay
Part no.:
50133006
- Application: Base device for E-Stop and safety door application...
- Restart: Manual
- Type of terminal: Screw terminal
- Functions: Monitoring of solenoid switches, Monitoring of E-S...
MSI-SR4B-01
Safety relay
Part no.:
547950
- Restart: Automatic, Manual
- Type of terminal: Screw terminal
- Functions: Cross circuit monitoring, Automatic start/restart,...
- Contacts: 3 NO contacts / 1 NC contact
MSI-SR5B-01
Safety relay
Part no.:
547952
- Restart: Automatic, Manual
- Type of terminal: Screw terminal
- Functions: Double sensor monitoring, Automatic start/restart,...
- Contacts: 2 NO contacts / -
Results list: 5 products found
KD S-M12-8A-P1-050
Connection cable
Part no.:
50135128
- Connection: Connector, M12
- Version: Axial, Female
- No. of pins: 8 Piece(s)
- Cable length: 5,000 mm
KD S-M12-8A-P1-100
Connection cable
Part no.:
50135129
- Connection: Connector, M12
- Version: Axial, Female
- No. of pins: 8 Piece(s)
- Cable length: 10,000 mm
KD S-M12-8A-P1-150
Connection cable
Part no.:
50135130
- Connection: Connector, M12
- Version: Axial, Female
- No. of pins: 8 Piece(s)
- Cable length: 15,000 mm
KD S-M12-8A-P1-250
Connection cable
Part no.:
50135131
- Connection: Connector, M12
- Version: Axial, Female
- No. of pins: 8 Piece(s)
- Cable length: 25,000 mm
KD S-M12-8A-P1-500
Connection cable
Part no.:
50135132
- Connection: Connector, M12
- Version: Axial, Female
- No. of pins: 8 Piece(s)
- Cable length: 50,000 mm
Results list: 4 products found
BT-SET-240BC
Mounting bracket set
Part no.:
560340
- Type of fastening, at device: Clampable
- Type of fastening, at system: Through-hole mounting
- Mounting device material: Metal
- Suitable for product group: Protective sensors
BT-SET-240BC-E
Mounting bracket set
Part no.:
540350
- Type of fastening, at device: Clampable
- Type of fastening, at system: Through-hole mounting
- Mounting device material: Metal, Plastic
- Suitable for product group: Protective sensors
BT-SET-240BCS
Mounting bracket set
Part no.:
560342
- Type of fastening, at device: Clampable
- Type of fastening, at system: Through-hole mounting
- Mounting device material: Metal
- Suitable for product group: Protective sensors
BT-SET-240BCS-E
Mounting bracket set
Part no.:
540352
- Type of fastening, at device: Clampable
- Type of fastening, at system: Through-hole mounting
- Mounting device material: Metal, Plastic
- Suitable for product group: Protective sensors
Results list: 3 products found
BT-2P40
Mounting bracket set
Part no.:
424417
- Design of mounting device: Mounting clamp
- Type of fastening, at device: Groove mounting
- Type of fastening, at system: Groove mounting
- Mounting device material: Metal
BT-2SB10
Mounting bracket set
Part no.:
424422
- Design of mounting device: Mounting clamp
- Type of fastening, at device: Clampable, On the lateral C-groove
- Type of fastening, at system: Through-hole mounting
- Mounting device material: Metal
BT-2SB10-S
Mounting bracket set
Part no.:
424423
- Design of mounting device: Mounting clamp
- Type of fastening, at device: Clampable, On the lateral C-groove
- Type of fastening, at system: Through-hole mounting
- Mounting device material: Metal
Results list: 6 products found
Set-AC-MLX-2SA
Muting sensor set
Part no.:
426520
- Number of muting sensors: 2 Piece(s)
- Type of muting sensors: PRK 25C retro-reflective photoelectric sensors
- Number of reflectors: 2 Piece(s)
- Suitable for: MLD 500, MLD 300 multiple light beam safety device...
Set-AC-MLX-2SB
Muting sensor set
Part no.:
426521
- Number of muting sensors: 2 Piece(s)
- Type of muting sensors: PRK 25C retro-reflective photoelectric sensors
- Number of reflectors: 2 Piece(s)
- Suitable for: MLD 500, MLD 300 multiple light beam safety device...
Set-AC-MLX.2-2SA
Muting sensor set
Part no.:
426526
- Number of muting sensors: 2 Piece(s)
- Type of muting sensors: PRK 25C retro-reflective photoelectric sensors
- Number of reflectors: 2 Piece(s)
- Suitable for: MLD 500, MLD 300 multiple light beam safety device...
Set-AC-MLX.2-2SB
Muting sensor set
Part no.:
426527
- Number of muting sensors: 2 Piece(s)
- Type of muting sensors: PRK 25C retro-reflective photoelectric sensors
- Number of reflectors: 2 Piece(s)
- Suitable for: MLD 500, MLD 300 multiple light beam safety device...
Set-AC-MTX-2S
Muting sensor set
Part no.:
426524
- Number of muting sensors: 2 Piece(s)
- Type of muting sensors: PRK 25C retro-reflective photoelectric sensors
- Number of reflectors: 2 Piece(s)
- Suitable for: MLD 500, MLD 300 multiple light beam safety device...
Set-AC-MTX.2-2S
Muting sensor set
Part no.:
426529
- Number of muting sensors: 2 Piece(s)
- Type of muting sensors: PRK 25C retro-reflective photoelectric sensors
- Number of reflectors: 2 Piece(s)
- Suitable for: MLD 500, MLD 300 multiple light beam safety device...
Results list: 3 products found
AC-SCM5U
Sensor connection module
Part no.:
520150
- Suitable for: MLD 330, MLD 530 multiple light beam safety device...
- Number of connections: 5 Piece(s)
- Type of fastening: Through-hole mounting
AC-SCM5U-BT
Sensor connection module
Part no.:
520151
- Suitable for: MLD 330, MLD 530 multiple light beam safety device...
- Number of connections: 5 Piece(s)
- Type of fastening: Mounting plate, Groove mounting
AC-SCM5U-BT-L
Sensor connection module
Part no.:
520152
- Suitable for: MLD 330, MLD 530 multiple light beam safety device...
- Number of connections: 5 Piece(s)
- Type of fastening: Mounting plate with L-angle, Groove mounting
Results list: 1 products found
Results list: 2 products found
LA-78M
Alignment aid
Part no.:
520023
- Suitable for: MLD 500, MLD 300 multiple light beam safety device...
LA-78M-UDC
Alignment aid
Part no.:
520024
- Suitable for: MLD 500, MLD 300 multiple light beam safety device...
Results list: 9 products found
UDC-1000-S2
Device column
Part no.:
549856
- Type, columns and mirrors: Device column
- Column height without foot: 1,000 mm
- Housing color: Yellow, RAL 1021
- Mechanical reset function: Yes
UDC-1140-S2
Device column
Part no.:
549879
- Type, columns and mirrors: Device column
- Column height without foot: 1,140 mm
- Housing color: Yellow, RAL 1021
- Mechanical reset function: Yes
UDC-1300-S2
Device column
Part no.:
549852
- Type, columns and mirrors: Device column
- Column height without foot: 1,300 mm
- Housing color: Yellow, RAL 1021
- Mechanical reset function: Yes
UDC-1600-S2
Device column
Part no.:
549853
- Type, columns and mirrors: Device column
- Column height without foot: 1,600 mm
- Housing color: Yellow, RAL 1021
- Mechanical reset function: Yes
UDC-1900-S2
Device column
Part no.:
549854
- Type, columns and mirrors: Device column
- Column height without foot: 1,900 mm
- Housing color: Yellow, RAL 1021
- Mechanical reset function: Yes
UDC-2100-S2
Device column
Part no.:
549867
- Type, columns and mirrors: Device column
- Column height without foot: 2,100 mm
- Housing color: Yellow, RAL 1021
- Mechanical reset function: Yes
UDC-2500-S2
Device column
Part no.:
549857
- Type, columns and mirrors: Device column
- Column height without foot: 2,500 mm
- Housing color: Yellow, RAL 1021
- Mechanical reset function: Yes
UDC-3100-S2
Device column
Part no.:
549865
- Type, columns and mirrors: Device column
- Column height without foot: 3,100 mm
- Housing color: Yellow, RAL 1021
- Mechanical reset function: Yes
UDC-900-S2
Device column
Part no.:
549855
- Type, columns and mirrors: Device column
- Column height without foot: 900 mm
- Housing color: Yellow, RAL 1021
- Mechanical reset function: Yes
EPLAN macro - edz