







Attention! This article is no longer available.




Results list: 1 products found
PRK25CL1.1/4P
Polarized retro-reflective photoelectric sensor
Part no.:
50139663
- Series: 25C
- Operating principle: Reflection principle
- Operating range, max.: 0.2 ... 20 m
- Design: Cubic
Series | 25B |
Operating principle | Reflection principle |
Operating range | 0.3 ... 12 m |
Operating range limit | 0.05 ... 15 m |
Light source | Laser, Red |
Laser class | 2, IEC/EN 60825-1:2007 |
Protective circuit | Polarity reversal protection, Short circuit protected |
Supply voltage UB | 10 ... 30 V, DC |
Residual ripple | 0 ... 15 %, From UB |
Open-circuit current | 0 ... 20 mA |
Number of digital switching outputs | 2 Piece(s) |
Switching element | Transistor, Push-pull |
Switching principle | Light switching (PNP)/dark switching (NPN) |
Switching element | Transistor, Push-pull |
Switching principle | Dark switching (PNP)/light switching (NPN) |
Switching frequency | 2,000 Hz |
Response time | 0.25 ms |
Type of connection | Cable |
Cable length | 2,000 mm |
Number of conductors | 4 -wire |
Dimension (W x H x L) | 15 mm x 38.9 mm x 28.7 mm |
Housing material | Plastic |
Plastic housing | PC-ABS |
Lens cover material | Plastic / PMMA |
Net weight | 55 g |
Type of fastening | Through-hole mounting, Via optional mounting device |
Operational controls | 270° potentiometer |
Ambient temperature, operation | -30 ... 40 °C |
Degree of protection | IP 67, IP 66 |
Protection class | II |
Certifications | c UL US |
Standards applied | IEC 60947-5-2 |
Customs tariff number | 85365019 |
ECLASS 8.0 | 27270902 |
ECLASS 9.0 | 27270902 |
ETIM 5.0 | EC002717 |
ETIM 6.0 | EC002717 |
Filter
Results list: 3 products found
BT 205M
Mounting device
Part no.:
50139831
- Type of fastening, at device: Screw type
- Type of fastening, at system: Through-hole mounting
- Mounting device material: Metal
- Suitable for product group: Switching sensors, cubic
BT 205M-10SET
Mounting device set
Part no.:
50124651
- Design of mounting device: Angle, L-shape
- Type of fastening, at device: Screw type
- Type of fastening, at system: Through-hole mounting
- Mounting device material: Metal
BT 25
Mounting device
Part no.:
50040269
- Design of mounting device: Angle, L-shape
- Type of fastening, at device: Screw type
- Type of fastening, at system: Through-hole mounting
- Mounting device material: Metal
Filter
Results list: 7 products found
BTP 200M-D10
Mounting system
Part no.:
50117830
- Design of mounting device: Protection hood
- Type of fastening, at device: Screw type
- Type of fastening, at system: For 10 mm rod
- Mounting device material: Metal
BTP 200M-D12
Mounting system
Part no.:
50117829
- Design of mounting device: Protection hood
- Type of fastening, at device: Screw type
- Type of fastening, at system: For 12 mm rod
- Mounting device material: Metal
BTP 200M-D14
Mounting system
Part no.:
50117828
- Design of mounting device: Protection hood
- Type of fastening, at device: Screw type
- Type of fastening, at system: For 14 mm rod
- Mounting device material: Metal
BTU 200M-D10
Mounting system
Part no.:
50117256
- Design of mounting device: Mounting system
- Type of fastening, at device: Screw type, Suited for M3 screws
- Type of fastening, at system: For 10 mm rod, Sheet-metal mounting
- Mounting device material: Metal
BTU 200M-D12
Mounting system
Part no.:
50117255
- Design of mounting device: Mounting system
- Type of fastening, at device: Screw type, Suited for M3 screws
- Type of fastening, at system: For 12 mm rod, Sheet-metal mounting
- Mounting device material: Metal
BTU 200M-D14
Mounting system
Part no.:
50117254
- Design of mounting device: Mounting system
- Type of fastening, at device: Screw type, Suited for M3 screws
- Type of fastening, at system: For 14 mm rod, Sheet-metal mounting
- Mounting device material: Metal
BTU 346M-D12
Mounting system
Part no.:
50122797
- Design of mounting device: Mounting system
- Type of fastening, at device: Screw type
- Type of fastening, at system: For 12 mm rod, Sheet-metal mounting
- Mounting device material: Metal
Filter
Results list: 3 products found
TK 100x100
Reflector
Part no.:
50003192
- Type of reflector: Reflector
- Type of fastening: Rear side can be glued
- Reflection surface width: 96 mm
- Reflection surface height: 96 mm
TKS 100X100
Reflector
Part no.:
50022816
- Type of reflector: Reflector
- Type of fastening: Through-hole mounting, Adhesive
- Reflection surface width: 96 mm
- Reflection surface height: 96 mm
TKS 40X60
Reflector
Part no.:
50040820
- Type of reflector: Reflector
- Type of fastening: Through-hole mounting, Adhesive
- Reflection surface width: 37 mm
- Reflection surface height: 56 mm
Filter
Results list: 2 products found
MTKS 20x20
Reflector
Part no.:
50040895
- Type of reflector: Reflector
- Type of fastening: Through-hole mounting, Adhesive
- Reflection surface width: 20 mm
- Reflection surface height: 20 mm
MTKS 50x50.1
Reflector
Part no.:
50117583
- Type of reflector: Reflector
- Type of fastening: Through-hole mounting, Adhesive
- Reflection surface width: 50 mm
- Reflection surface height: 50 mm
Results list: 1 products found
REF 4-A-50x50
Reflective tape
Part no.:
50108300
- Type of reflector: Reflective tape
- Type of fastening: Self-adhesive
- Reflection surface width: 50 mm
- Reflection surface height: 50 mm
Filter
Results list: 2 products found
REF 6-A-14x45
Reflective tape
Part no.:
50123861
- Type of reflector: Reflective tape
- Type of fastening: Self-adhesive
- Reflection surface width: 15 mm
- Reflection surface height: 45 mm
REF 6-A-9x9
Reflective tape
Part no.:
50123899
- Type of reflector: Reflective tape
- Type of fastening: Self-adhesive
- Reflection surface width: 9 mm
- Reflection surface height: 9 mm