SET LS 618/4-S12

Throughbeam photoelectric sensor

Part no.: 50038451

Icon
Follow-up article

Hello, we'd be happy to be of assistance to you.

This is a combination product: receiver and transmitter of the same series are required for operation.
Please ensure that both devices are replaced with the appropriate product alternatives.
Please use the receiver's designation or part number to find an alternative transmitter/receiver combination.

Please refer to the file Application Note Substitutes to find technical details on substitute products.
The file can be found under the Downloads/Technical documentation tab.

Results list: 2 products found
LE328/4P-M12
Throughbeam photoelectric sensor receiver
Part no.: 50122709
  • Series: 328
  • Operating principle: Throughbeam principle
  • Operating range, max.: 0 ... 10 m
  • Design: Cylindrical
Part no.: 50122709
LS328/9D-M12
Throughbeam photoelectric sensor transmitter
Part no.: 50122702
  • Series: 328
  • Operating principle: Throughbeam principle
  • Operating range, max.: 0 ... 10 m
  • Design: Cylindrical
Part no.: 50122702
Series 618
Operating principle Throughbeam principle
Device type Set (transmitter and receiver)
Special version Article set
Operating range 0 ... 10 m
Operating range Guaranteed operating range
Operating range limit 0 ... 12 m
Operating range limit Typical operating range
Light source LED, Infrared
Wavelength 880 nm
Type of light spot geometry Round
Protective circuit Overvoltage protection
Short circuit protected
Supply voltage UB 10 ... 30 V, DC
Residual ripple 0 ... 10 %, From UB
Open-circuit current 0 ... 30 mA
Number of digital switching outputs 1 Piece(s)
Switching element Transistor, PNP
Switching principle Light/dark switchable
Switching frequency 500 Hz
Response time 1 ms
Readiness delay 100 ms
Function Signal IN
Signal OUT
Voltage supply
Type of connection Connector
Thread size M12
Type Male
Material Metal
No. of pins 4 -pin
Encoding A-coded
Dimension (Ø x L) 18 mm x 60 mm
Thread size M18 x 1 mm
Housing material Metal
Metal housing Nickel-plated brass
Lens cover material Plastic
Net weight 80 g
Housing color Silver
Type of display LED
Operational controls 270° potentiometer
Ambient temperature, operation -25 ... 55 °C
Ambient temperature, storage -30 ... 70 °C
Degree of protection IP 67
Protection class II
Standards applied IEC 60947-5-2
Customs tariff number 85365019
ECLASS 5.1.4 27270901
ECLASS 8.0 27270901
ECLASS 9.0 27270901
ECLASS 10.0 27270901
ECLASS 11.0 27270901
ECLASS 12.0 27270901
ETIM 5.0 EC002716
ETIM 6.0 EC002716
ETIM 7.0 EC002716
ETIM 8.0 EC002716
3D-CAD model - zip
Operating instructions - Application Note - pdf
Data sheet - pdf